Q:Will this fit on the back of a Go Go Elite Traveler Scooter? And can an elderly person use it with ease. The others I have looked at require a lot of manipulation with velcro straps.
Asked by: Carlotta
- 4/22/2017
A: Yes, it should work with a Go Go Elite. The mounting harness is not very picky to the style/size of the back and has a variety of applications. This Walker Holder does still require use of velcro straps not only to secure the holder to the scooter, but also to secure the walker inside of the bag.
Was this answer helpful?
1 of 2 Customer(s) found this Answer helpful.
Answer provided by: Banks (4/22/2017)
Q:Will walker fit a Golden Technologies Advenger?
Asked by: Usveteran
- 10/10/2019
A: Yes, the Walker Holder for Scooters should fit your Golden Technologies Advenger scooter.
Was this answer helpful?
1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Andy (10/10/2019)
Q:I have a Pride Go Go travel scooter.Will this cane holder allow the seat to be folded down with the cane holder in place? I have a electric lift in my van that requires the seat back be down so it will fit in the back and I don't want to keep removing the cane holder.
Asked by: Jim Dee
- 5/12/2018
A: Typically the walker holder does not need to be removed. Since it is made of a flexible fabric, you should be able to fold the back down without having to remove the walker holder.
Was this answer helpful?
0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Banks (5/12/2018)
Q:Will a Drive Medical Winnie Walker (3-wheel) fit this product?
Asked by: Stan Schwartz
- 2/8/2016
A: The walker holder is only intended for standard walkers. It might still work with a Winnie Walker, however you might have tipping issues unless you secure it.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Banks (2/8/2016)
Q:Can the walker holder be attached to a standard, non-motorized, rental wheelchair?
Asked by: JM
- 9/30/2016
A: The mounting harness straps are pretty long so it will fit a variety of scooter/wheelchair back. So long as the straps can go all the way around and be secured, you shouldn't have a problem.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Banks (9/30/2016)
Q:How exactly does it attach. My chair has separate head rest ?
Asked by: Georgia
- 11/18/2016
A: The Walker Holder uses a Velcro strap harness that slips over the backrest. Two straps go over the top and one around the sides. The two straps over the top should have enough room between them for chairs with head rests.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Banks (11/18/2016)
Q:what are the dementions length, width, depth?
Asked by: john
- 6/25/2017
A: 24 inches wide, 10 inches high, 2 inches deep.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Banks (6/25/2017)
Q:Would this be able to be used for a bariatric manual wheelchair? If not, do you have any suggestions for something else to do the same?
Asked by: Katie
- 8/10/2017
A: The mounting harness straps are pretty long, so yes you should be able to use it with a bariatric chair as well.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Banks (8/10/2017)
Q:Going to Europe soon. Can this carrier be used to carry a three wheeled triangular shaped Winnie walker?? Please hurry your answer. Thanks 83e60w
Asked by: Jeanne Bernard
- 10/4/2017
A: Although it would be possible, this bag is only intended for standard walkers.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Banks (10/4/2017)
Q:Will this fit on fortress s700 scooter
Asked by: Ron Boivin
- 5/18/2021
A: Fits seatbacks 7”- 24” tall, so there should be no problem fitting the Fortress S700
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Amy (5/15/2024)
Q:are you able to use this walker holder on a scout 3 scooter12
Asked by: Jack
- 10/26/2021
A: Fits seatbacks 7”- 24” tall, so there should be no problem fitting the The Spitfire Scout 3-Wheel Scooter
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Amy (5/15/2024)
Q:Can this be used with a standard manual-push wheelchair?
Asked by: Frank Block, Jr.
- 4/26/2022
A: This will not mount onto a manual wheelchair, only Scooters and Powerchairs that allow the Velcro strap to wrap vertically around the seat.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Amy (5/15/2024)
Q:What about bariatric walkers?
Asked by: Kathleen Smith
- 2/4/2023
A: This will not work with bariatric walkers.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Amy (5/15/2024)
Q:Are the walker power chair holders covered by medicare?
Asked by: Ray
- 4/22/2023
A: To offer you the best quality daily living aides at an affordable price, The Wright Stuff does not bill or accept Medicare or other third-party insurance at this time. We do not have information indicating if this item is covered by Medicare.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Amy (5/15/2024)
Q:Will it fit in the back of a smart scooter
Asked by: Ann
- 4/24/2023
A: Fits seat backs 7”- 24” tall, Scooters and Powerchairs that allow the Velcro strap to wrap vertically around the seat.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Amy (5/15/2024)
Q:To Whom It May Concern,
Would the walker holder fit the electric scooters that they use in grocery stores? She has a collapsible walker with wheels. If her collapsed walker is under 24 inches wide and laying flat measures less than 3" high would that be all that we need to be sure it will fit? This item would make her life so much easier.
Thank you
Bill Mangieri
Asked by: WILLIAM D. MANGIERI
- 5/5/2024
A: The holder fits seat backs 7”- 24” tall, so there should be no problem fitting the "grocery store" scooters. This walker holder is only for Standard 4 post folding walkers. It holds walkers that are 50" in circumference when folded.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.