Q:i have a jennings 1000 which model do i use ? ..lord knows i need a cup holder
Asked by: midi459
- 12/21/2016
A: That depends on the style of the armrest. If the armrest pad is removable it is easiest to use the 1322 Scooter Mount which is locked in place between the armrest pad and frame. if the armrest pad is not removable you can choose from the 1323 clamp mount, which Velcros around and exposed tubing, or the 1324 which attaches with Velcro straps around the armrest.
Was this answer helpful?
5 of 6 Customer(s) found this Answer helpful.
Answer provided by: Banks (12/21/2016)
Q:How is holder attached?
Asked by: Stan jones
- 5/25/2018
A: The #1322 is for most scooters and power chairs with padded armrest that have removable arm pads. This holder mounts to the existing hardware underneath scooter or power chair armrest. The #1323 has a d-ring strap that is designed to attach to exposed round horizontal or vertical tubing. The #1324 has 3 straps to wrap around the armrest and can be used for any wheelchair or scooter armrest.
Was this answer helpful?
3 of 4 Customer(s) found this Answer helpful.
Answer provided by: Andy (5/25/2018)
Q:Do any of your cup holders for power wheelchair AND scooter have a cellphone holder?
Asked by: Bonnie Cohen
- 1/19/2017
A: I apologize, but no cupholders come with a cellphone holder as well. However, we do have other pouches/totes that you could use in addition to a cup holder for a cell phone. Please look under Wheelchairs & Accessories > Wheelchair Packs, Bags & Totes for options.
Was this answer helpful?
2 of 3 Customer(s) found this Answer helpful.
Answer provided by: Banks (1/19/2017)
Q:How do go about ording a cup and cell holder to my wheelchair? I have a Permobil C300.
Asked by: Karen Gallimore
- 2/21/2018
A: For this Cup Holder, it depends on the type hardware on your wheelchair. The #1322 is for most scooters and power chairs with padded armrest that have removable arm pads. This holder mounts to the existing hardware underneath scooter or power chair armrest. The #1323 has a d-ring strap that is designed to attach to exposed round horizontal or vertical tubing. The #1324 has 3 straps to wrap around the armrest and can be used for any wheelchair or scooter armrest.
Was this answer helpful?
2 of 3 Customer(s) found this Answer helpful.
Answer provided by: Customer Service (2/27/2018)
Q:How wide of an armrest will the Velcro strap accommodate?
Asked by: Ly Fawkes
- 5/17/2018
A: The #1324 has 3 straps to wrap around the armrest and can be used for any wheelchair or scooter armrest so it should accommodate any width.
Was this answer helpful?
1 of 2 Customer(s) found this Answer helpful.
Answer provided by: Andy (5/17/2018)
Q:I am interested in the weelchair cupholder item#1332, however, I am not sure which mounting type to order. the pictures shown on your website do not indicate which mounting type each picture corresponds with. I am interested in the cup holder picture that shows the cup holder extending directly from the end of the arm rest. can you please assist? which mounting type was used to achieve this configuration?
Asked by: Laurie
- 1/11/2017
A: The 1322, the scooter mount, and 1324, the Velcro mount, are both pictured extending directly out in front of the armrest. The 1323 is the clamp mount, which Velcros around any exposed tubing. The pictures are labeled, select the variation from the drop down menu and the item number will change to correspond.
Was this answer helpful?
0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Banks (1/11/2017)
Q:Will it fit 24 oz. disposable plastic cups from most coffee stands? And how long will it take for the items to arrive at my home? (shipping wise)}
Asked by: Jim Snyder
- 4/19/2017
A: Yes, the Armrest Cup Holders hold up to 44 oz cups or mugs. These typically ship via USPS Priority Mail, which is usually 3 days or less for delivery.
Was this answer helpful?
0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Banks (4/19/2017)
Q:does this cup holder fit a pride
wheelchair ? Under the removable pad ? no straps ?
Asked by: lou
- 10/28/2017
A: If you have a removable armrest pad I would recommend the 1322, the Scooter mount, if you do not want to use straps. The Scooter mount uses a flat bar that slips between the armrest pad and sub-frame, tightening the armrest pad down keeps it in place.
Was this answer helpful?
0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Banks (10/28/2017)
Q:Does this attach on the underside of the arm, or are there straps involved?
Asked by: Dr. Joe
- 11/6/2017
A: If you have a removable armrest pad, the 1322 would not require straps. The 1322, the Scooter mount, uses a flat bar that slips between the Armrest pad and armrest sub-frame.
Was this answer helpful?
0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Banks (11/6/2017)
Q:Will the model 1322cup holder fit on a breezy/guardian manual wheelchair? Also what type is it ?
Asked by: Hope draak
- 5/10/2018
A: The 1322 is the Scooter Mount version. I do not think it would work with a standard manual wheelchair because of the way the armrests mount. Scooters typically have a wider base that the armrests mount to than wheelchairs. Also, scooter armrests are not elevated off the base or tubing like wheelchair armrests are. The 1322 has to have something to pinch the mount between.
Was this answer helpful?
0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Banks (5/10/2018)
Q:Will this fit on a Jazzy 614 HD power wheelchair?
Asked by: Jim Graham
- 6/11/2018
A: If the armrest pad is removable it is easiest to use the 1322 Scooter Mount which is locked in place between the armrest pad and frame. If the armrest pad is not removable you can choose from the 1323 clamp mount, which Velcros around and exposed tubing, or the 1324 which attaches with Velcro straps around the armrest.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Andy (6/11/2018)
Q:Which cup holder is best for Permobile F-5
Asked by: Joe
- 10/27/2018
A: The Wheelchair Armrest Cup Holder is designed to be placed between the armrest and armrest cushion. Other cup holders would depend mainly on the type of tubing the chair has. Most cup holders available are universal and fit the majority of chair tubing. Before purchasing a cup holder, measure the tubing where it will be placed to make sure the cup holder will accommodate the chair.
One of the Top Selling cup holders is the OH Cupholder that's Nearly Universal (Product #: MOH400)
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.